Sec. 6-Fig. 47-A (New-1-1962)
PAVING MACHINE-BITUMINOUS MATERIAL --CRAWLER MOUNTED -FLAT CARS
Item No. of Pcs.
Brake wheel clearance. Fig. 2, Sec. 1.
Blocks Pat. 67. Locate 5 ea. against screed plate and 5 ea. against truck roller support frame as
shown. Nail each to floor with two 60-D, two 40-D and two 20-D nails, and toe-nail each side
with two 40-D nails.
Blocks Pat. 68. Locate against each side of main frame of tractor unit as shown. Nail each to
floor with five 60-D nails.
Each 2 in. x 4 in. x 96 in. Locate one each against outer edge of crawler treads as shown. Nail to
floor with 20-D nails every 20 inches.
Blocks, 2 in. x 4 in. x 6 in. Locate inner ends against Item "D" as shown. Nail each to floor with
three 20-D nails.
Each 2 in. x .050 in. high tension bands. Pass one over leveler arms and one over hopper and
through stake pockets as shown.
Each 1/2 in. x 6 x 19, independent wire rope core, preformed steel cable, length to suit, doubled.
Screed end, attach one to each main screed support brackets, hopper end, attach one to each
lifting eye. Cables to be passed through stake pockets, over 1/2 in. thimbles, on sides of car
opposite to points of attachment on unit. Secure ends of cable with two 1/2 in. "U" bolt cable
clips and thimbles with one "U" bolt cable clip.
See General Rules 4, 5, 7, 9, 14, 15 and 19A for further details