• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
MOBILE, LIGHT WEIGHT SEMI-TRAILERS, WITH OR WITHOUT DOLLY-FLAT CARS - TM-55-2200-001-12_186
SEMI-TRAILERS, FLATBED WITH REGID GOOSE NECK AND DUAL WHEELS-DOUBLE DECKED-FLAT CARS

TM-55-2200-001-12 Modular Causeway System (MCS) Floating Causeway (FC) FC-1 NSN 1945-01-473-2162 Manual
Page Navigation
  134    135    136    137    138  139  140    141    142    143    144  
TM 55-2200-001-12 Change 1 Sec.  6-Fig.  67 (Rev.-11-1978) (Drawing Redrawn 11-1978) MOBILE, LIGHT WEIGHT SEMI-TRAILERS, WITH OR WITHOUT DOLLY-FLAT CARS Item No.  of Pcs.   Description L 2 each unit. 2 in.  x 6 in.  lumber, length to suit.  Locate as shown and secure top portion to Item "G" and outside Item "F" with four 30-D nails and bottom portion to center Item "F" with four 30-D nails. M 1 each unit.   Dolly lunette support built up of lumber, two double 2 in.  x 6 in.  uprights and crosspieces, 2 in.  x 6 in.  diagonal braces and 2 in.  x 4 in.  floor cleats.  Locate as shown, suitably spaced under lunette of dolly. N 2 each axle.   1 in.  No.  14 B.W.  gage hot rolled steel, with anchor plates, pattern 19, Section 6.  Locate over axle springs or spring shackles and secure each plate to floor with eight 20-D cement coated nails. O Vacant. P Vacant. Q 4 each unit. Wire rope, 3/8 inch, 6 x 19, IWRC, doubled.  Apply to front and rear spring shackles and stake pockets on each side of unit in complete loop.  Secure wire rope with four 3/8 inch cable clips. A thimble is to be placed at the bottom of each stake pocket and secured to the wire rope with a cable clip. R 4 each dolly unit, Wire rope, 3/8 inch, 6 x 19 IWRC, single strand.  Attach to rear spring shackles and stake pockets as required. and to safety chain eye or frame and stake pocket on each side of unit.  Secure wire rope at each end with three 3/8 inch cable clips.  A thimble is to be placed at the bottom of each stake pocket and secured to the wire rope with a cable clip. S 4 each unit Wire rope, 3/8  inch, 6 x 19 IWRC, doubled.  Secure to formed 1/2 inch bars with eyes at ends and without dolly. to stake pockets in complete loop on each side of unit.  Secure wire rope with four 3/8 inch 2 each unit cable clips.  A thimble is to be placed at the bottom of each stake pocket and secured to with dolly. wire rope with a cable clip. Notes: 1. Items "E", "F", "G", "H", "J", "K", and "L" not required when a dolly is applied under front of unit. 2. Item "M" required only on units equipped with dolly. See General Rules 1, 2, 3, 4, 5, 7, 9, 14, 15, 19 and 19-B for further details. E-87







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.