4-17. CAB DOOR AND LOCK (cont)
CLEANING, INSPECITON, AND REPAIR
flammable. Wear protective goggles and gloves and
use only in a well-ventilated area. Avoid contact
with skin, eyes, and clothes and don't breathe
vapors. Do not use near open flame or excessive
heat. The flash point is 100 - 138°F (38 - 59°C). If
you become dizzy, get fresh air and medical aid
immediately. If contact with eyes is made, wash
your eyes and get medical aid immediately.
Clean metal parts with dry-cleaning solvent.
Inspect parts for cracks, breaks, and damage.
Inspect handle and lock for condition and serviceability.
Repair consists of replacement of damaged parts.
If removed, weld hinges (12) to door (2) and cab.
Install door catch (11) and two machine screws (10).
Position lock (9) on inside of door (2) and install five screws (8).
Position handle (7) on outside of door (2) and install four screws (6).
Install glass (5) in weather-strip (4) and position in window sash in door (2). Install weather-strip filler (3).
Position door (2) on cab body and install two pins (1).