4-32. ELECTRICAL EQUIPMENT CABINET CONVENIENCE RECEPTACLE
This task covers:
Tool kit SC4940-97-CL-E16
Remove rings, bracelets, wristwatches, and neck
chains before working around the locomotive.
Jewelry can catch on equipment and cause injury,
or may short across an electrical circuit and cause
severe burns or electrical shock.
High voltage is used in the operation of equipment.
Do not be misled by the term LOW VOLTAGE.
Potentials as low as 50 volts may cause death.
Open electrical equipment cabinet and set battery switch to OFF. Use a multimeter and perform a continuity test
on the electrical cabinet convenience receptacle. Replace defective parts.
Remove screw (1) and cover (2).
Remove two screws (3) and receptacle (4).
Loosen two screws (5). Tag and disconnect wires (6) and (7).
Connect wires (6) and (7) to receptacle (4) and remove tags.
Tighten two screws (5).
Install receptacle (4) and secure with two screws (3).
Install cover (2) and secure with screw (1).