Quantcast TRAIN LINE AIR HOSES AND FITTINGS

 
  
 
TM 55-2210-223-12 TO 45A2-2-14-41 4-48.  TRAIN LINE AIR HOSES AND FITTINGS This task covers: a. REMOVAL b. Installation INITIAL SETUP TOOLS Tool kit SC4940-97-CL-E16 REMOVAL NOTE The  gasket  (1),  in  train  line  air  hoses  (3)  can  be  replaced  without  removing  the  air  hoses  from  the  locomotive.    To remove and replace the gasket, do steps 1 and 4. 1.  Insert screwdriver between gasket (1) and glad hand (2) and pry gasket from groove. 2.  Remove air hose (3) from angle cock (4). INSTALLATION 3. Install air hose (3) on angle cock (4). 4. Start  gasket  (1)  into  groove  of  glad  hand  (2)  and  continue  to  work  the  gasket  into  place  by  hand,  forcing  the outside edge of gasket away from the coupling body so that it can be pressed or allowed to snap completely into the groove. 5. Connect glad hand to another glad hand.  Open angle cock (1) and check for air leaks. 4-104 Change 1


 


Privacy Statement - Copyright Information. - Contact Us

comments powered by Disqus

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +