3-35. EXCITER-AUXILIARY GENERATOR ASSEMBLY (cont)
Procedures specify the heating of parts to aid in disassembly. Heated parts may cause injury to personnel
if hand protection is not worn when handling. Wear protective gloves for maximum protection.
Some parts may have to be heated to release them from their shrink fit. When this becomes necessary,
the use of a portable propane torch and a puller tool set is recommended for disassembly.
Remove six bolts (8), lockwashers (9), flat washers (10), and two covers (11).
Remove three bolts (12), lockwashers (13), flat washers (14), and screen (15).
Remove three bolts (16) and lockwashers (17) from pulley (18) and remove pulley.
Remove three bolts (19) and inner pulley (20).
Remove key (21).