3-40. SHUTTER ASSEMBLY
This task covers:
Tool kit SC 4940-97-CL-E12
Drycleaning solvent (Item 30, Appendix B)
Lubricating Oil (Item 19, Appendix B)
Radiator hood removed
REMOVAL AND DISASSEMBLY
Remove bolt (1), flat washer (2), and locknut (3) and disconnect shutter actuator linkage (4).
Remove 10 bolts (5) and lockwashers (6).
Components of this locomotive are heavy and may be awkward to handle. Use correct lifting procedures,
indicated lifting devices, and/or assistance from other personnel to avoid injury.
Use a suitable lifting device and lift shutter assembly (7) from locomotive. Slowly lower shutter assembly to ground
and set on a suitable support device.
Remove cotter pin (8), flat washers (9) and (10), and shutter actuator linkage (4).