3-42. RADIATOR (cont)
Leaking radiator must be repaired at intermediate general support level maintenance facility.
Components of this locomotive are heavy and may be awkward to handle. Use correct lifting procedures,
indicated lifting devices, and/or assistance from other personnel to avoid injury.
Use a suitable lifting device and lift radiator assembly (7) over locomotive. Slowly lower radiator assembly on
locomotive and secure with 10 flat washers (2), bolts (3) and locknuts (1).
Install two 6-inch (152 mm) hoses (5) and eight clamps (4).
Connect vent tube (6) to radiator (7).
Fill radiator with a 50/50 mix of antifreeze and water.