TM 55-2210-223-34
TO 45A2-2-14-22
4-8.
AIR COMPRESSOR (cont)
DISASSEMBLY (cont)
35.
Remove four piston pin snap rings (96), two piston pins (97), two connecting rods (98), and four bolts (99).
36.
Remove four cotter pins (100), nuts (101), bolts (102), and cap (103).
37.
Remove oil pump plunger (104) from oil pump housing (105).
38.
Remove capscrew (106), washer (107), oil strainer body (108), retainer ring (109), and oil strainer screen (110).
39.
Remove key (111).
40.
Remove 11 nuts (112), main bearing housing (113), and gasket (114).
WARNING
Components of this locomotive are heavy and may be awkward to handle.
Use
correct
lifting
procedures, indicated lifting devices, and/or assistance from other personnel to avoid injury.
CAUTION
Be careful not to damage crankshaft during removal.
41.
Use a suitable lifting device and slowly remove crankshaft (115) from crankcase (116).
42.
Remove main ball bearings (117) and (118) and oil seals (119) and (120).
4-14