3-9. OIL AND FUEL PRESSURE GAGES
This task covers:
Tool kit SC 4940-97-CL-E12
Federal Railroad Administration requires annual testing of fuel and oil
pressure gages or when gage is not operating properly.
Oil and fuel pressure gages are removed and installed in the same manner.
Disconnect oil pressure line (1) from oil pressure gage (5).
Remove two nuts (2), lockwashers (3), and retainer bracket (4). Remove oil pressure gage (5).
Repeat steps 1 and 2 and remove fuel pressure line from fuel pressure gage (6) and remove gage.