4-16. WINDOW GLASS AND SASH
CLEANING, INSPECTION, AND REPAIR
· Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and
use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe
vapors. Do not use near open flame or excessive heat. The flash point is 100-138°F (38-59°C). If
you become dizzy, get fresh air and medical aid immediately. If contact with eyes is made, wash
your eyes and get medical aid immediately.
· Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Do not direct
compressed air against skin. Use goggles or full face shield.
Clean metal parts with drycleaning solvent and dry with compressed air.
Inspect weatherstrip for cracks, breaks, and damage.
Inspect glass for chips and cracks.
Inspect frames and sashes for cracks, breaks, and deformation.
Repair consists of replacement of damaged parts.
Position glass (22) in weatherstrip (21) and install weatherstrip with glass in window frame (19). Install
weatherstrip filler (20).
Position window frame (19) and install six lockwashers (18) and screws (17).
Install two flat washers (16) and wingnuts (15).
Position rain shield (14) and install 10 screws (13).
Install windshield wiper (para 4-15).