TM 55-2210-224-12
4-31. MULTIPLE-UNIT CONTROL JUMPER
This task covers:
a.
Test
b.
Inspection
c.
Removal
d.
Installation
INITIAL SETUP
Tools
Tool kit SC4940-97-CL-E16
TEST & INSPECTION
1.
Inspect jumper for burned, corroded, or broken
terminal contacts.
2.
Use multimeter and test for continuity.
REMOVAL
3.
Remove multiple-unit control jumper (1) from
receptacle.
4.
Remove two nuts (2), lockwashers (3), screws
(4), and clamp (5). Remove multiple-unit
control jumper (1).
INSTALLATION
5.
Position multiple-unit control jumper (1) in
clamp (5). Install two screws (4), lockwashers
(3), and nuts (2).
6.
Plug
multiple-unit
control
jumper
(1)
in
receptacle.
4-81