TM 55-2210-224-12
2-10. PRESTART INSTRUCTIONS (cont)
d. Set controls as follows:
(1)
CONTROL switch (1) to OFF.
(2)
Both ENGINE STOP switches
(2) to STOP position.
WARNING
High voltage is used in the
operation of equipment. Remove
rings,
bracelets,
wristwatches,
and neck chains before working
around the locomotive. Jewelry
can catch on equipment and
cause injury, or may short across
an electrical circuit and cause
death or severe injury.
(3)
BS switch (3) to close.
(4)
GRCO switch (4) to close.
(5)
Throttle (5) to IDLE.
(6)
Reverser
(6)
to
NEUTRAL
position.
(7)
Independent brake valve (7) to
FULL APPLICATION.
(8)
Cutoff pilot valve (8) to IN.
(9)
Automatic brake valve (9) to
RELEASE.
(10)
EMER SHUTDOWN switch (10)
to RUN.
2-28