TM 55-2210-224-34
3-24. POWER CONTACTOR (cont)
INSTALLATION
27.
Position power contactor assembly (3) and install flat washers (2) and capscrews (1).
28.
Connect electrical wires in accordance with wiring diagram and remove tags.
ADJUSTMENT
29.
Measure contact tip overtravel as follows:
NOTE
Overtravel is the distance a movable contact tip would travel after touching the stationary tip if the
stationary tip were then removed.
a.
Measure overtravel by either method 1, pin at A, or method 2, pin at B. Consult table 3-3 for amount of
overtravel and size of pin required to measure that amount.
3-96