AIR COMPRESSOR ASSEMBLY
This task covers:
Tool kit SC4940-97-CL-E12
Antiseize tape (Item 35, Appendix B)
Suitable lifting device
Air compressor belts removed
Drain oil from crankcase.
Disconnect unloader air line fitting (1).
Disconnect flex pipe (2).
Remove four bolts (3), lockwashers (4), and two bars
Components of this locomotive are heavy and may be
awkward to handle. Use correct lifting procedures,
indicated lifting devices, and/or assistance from other
personnel to avoid injury.
Use a suitable lifting device and slowly remove air
compressor (6). Set on suitable support device.