3-64. TRACTION MOTOR ASSEMBLY (cont)
Heated parts may cause injury to personnel if hand protection is not worn when handling. Wear
protective gloves for maximum protection.
Some parts may have to be heated to release them from their shrink fit. When this becomes
necessary, the use of a portable propane torch, a portable hydraulic press, and puller tools are
recommended for disassembly.
Use a torch and apply heat to expand seal collar (36) and slide off shaft of armature (37).
Remove eight capscrews (38), lockwashers (39), end plate (40), and shim pack (41) from motor housing (42).