4-10. MOTOR MOUNTS This task covers:
This task covers:
Tool kit SC4940-97-CL-E12
Suitable lifting device
Remove two cotter pins (1), nuts (2), flat washer (3),
pads (4), and capscrews (5).
Components of this locomotive are
heavy and may be awkward to handle.
Use correct lifting procedures, indicated
lifting devices, and/or assistance from
other personnel to avoid injury.
Use a suitable lifting device and raise engine
enough to remove pad (6) from mount (7).
Check that pad (6) and pads (4) are not
cracked, distorted, or damaged. Replace
Position pad (6) on mount (7) and lower engine into
Install two capscrews (5), pads (4), and flat washers
(3). Secure with two nuts (2) and cotter pins (1).