TM 55-2210-224-34
4-19. CUTOUT COCK AND STRAINER
This task covers:
a.
Disassembly
c.
Inspection
e.
Assembly
b.
Cleaning
d.
Repair
f.
Test
INITIAL SETUP
Tools
Material/Parts
Tool kit SC4940-97-CL-E12
Drycleaning solvent (Item 34, Appendix B)
Filter 569146
Equipment Condition
Reference
Condition Description
Para 3-55
Cutout cock and strainer removed
DISASSEMBLY
WARNING
Valve assemblies may be under a spring load. Use caution during disassembly procedures so that no
parts fly out, causing injury to personnel.
NOTE
When removing or repairing brake valves or components, check air lines and pipes for corrosion,
brakes, splits, or loose connections. Repair of air lines and piping consists of replacing defective
pipes, lines, and connections. Refer to TM 55-2210-224-24P for identification of piping.
1. Remove four bolts (1), strainer cover (2), gasket (3), and filter (4).
2. Remove pin (5) and handle (6).
4-96