TM 55-2210-224-34
3-14.
BATTERY VOLTMETER GAGE (cont)
REMOVAL
3.
Open electrical equipment cabinet door and set battery switch to OPEN.
4.
Remove four capscrews (1), rear cover (2), and
gasket (3).
5.
Remove two nuts (4) and flat washers (5). Tag
and disconnect electrical leads (6) from battery
voltmeter gage (10).
6.
Disconnect battery voltmeter gage light (7).
7.
Remove three nuts (8) and screws (9). Remove
battery voltmeter gage (10).
INSTALLATION
8.
Place battery voltmeter gage (10) in control
cabinet and install three screws (9) and nuts (8).
9.
Connect battery voltmeter gage light (7).
10.
Connect electrical leads (6) to battery voltmeter gage (10) and install two flat washers (5) and nuts (4). Remove
tags.
11.
Position gasket (3) and rear cover (2) on control cabinet and install four screws (1).
12.
Close electrical equipment cabinet door.
3-49