TM 55-2210-224-34
3-17.
SANDER CONTROL VALVE (cont)
DISASSEMBLY (cont)
6.
Remove two screws (12) and cover (13).
7.
Remove exhaust nut (14), O-ring (15), field
yoke (16), and coil case (17).
8.
Remove coil pole (18), spring (19), plunger
body (20), and plunger seat (21).
9.
Remove plunger spacer (22), plunger seat
(23), and plunger cap (24) from solenoid
valve body (25). Discard plunger seat.
10.
Remove O-rings (26)and (27). Discard O-
rings.
11.
Remove four screws (28) and lockwashers
(29).
12.
Remove actuating cap (30), O-rings (31) and
(32), and rubber cup (33). Discard O-ring
and rubber cup.
13.
Remove actuating piston (34), O-ring (35),
neoprene valve seat (36), and piston stem
(37). Discard O-ring.
14.
Remove two plunger bodies (38), plungers
(39), and O-rings (40). Discard O-rings.
3-54