Sec. 6-Fig. 18
CAR NO. 2 (TWO-CAR-SHIPMENT) BARGES, BOLTED, SECTIONAL, FOR DECK CARGOES-FLAT CARS
Item
No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2.
B
4
6 in. x 8 in., length to suit. Locate against ends of unit, as shown, and secure
each to floor with four 3/4 in. dia. bolts.
C
6
Each to consist of two pieces of 2 in. x 4 in. x 36 in. Locate, as shown, suitably
spaced against outside Items "B", and secure lower piece to floor with six 30-D
nails and top piece to one below in like manner.
D
3
Each to consist of two pieces of 2 in. x 4 in., length to fully fill space between
inside Items "B", suitably spaced. Secure lower piece to floor with four 30-D
nails and top piece to one below in like manner.
E
8
1 in. dia. rods. Attach to each end of unit, as shown, and pass through opposite
stake pockets. And Item "F".
F
8
1/2 in. x 4 in. x 10 in. plates.
Covers attached to barge sections must be adequately secured with bolts.
See General Rules 4, 5, 9, 11, 14 and 15 for further details.
E-16
