Sec. 6-Fig. 89 (Rev.-1-1976)
DOLLY SET, TRANSPORTABLE-FLAT OR GONDOLA CARS WITH WOOD FLOORS
Item No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2, Sec. 1.
B
4 ea. unit.
6 in. x 8 in. x 24 in. blocks, Sketch 3. Locate 45° portion of block against front of front wheels
and rear of rear wheels. Nail heel of block to car floor with three 40-D nails and toe nail portion
of block under tire to floor of car with two 40-D nails prior to Items "C" and "D" being applied.
C
4 ea. unit.
Wheel side blocking, pattern 89. Position Item "D" between tire and Item "C" before nailing Item
"C" to car floor.
D
1 ea. Item "C".
Suitable material such as waterproof paper. Locate bottom portion under Item "C". Top portion
to extend 2 inches above Item "C".
E
4 ea. unit.
High tension bands 2 in. x .050 in. x length to suit. Loop over both sides of front and rear axles,
under hydraulic brake anchor plates. Nail anchor plate to floor of car with eight 20-D cement
coated nails. See Sketches 1 and 2.
See General Rules 1, 2, 3, 4, 5, 9, 14, 15 and 19B for further details.
E-124
