TM 55-2210-223-12
TO 45A2-2-14-41
4-42. COOLING SYSTEM HOSES AND CLAMPS (cont)
3.
Loosen two hose clamps (3). Remove eight capscrews (4) and lockwashers (5).
Remove pipe (6) and gasket (7).
4.
Loosen two hose clamps (8). Remove hose (9) from radiator inlet. Remove hose clamps (3) and (8) from hose.
5.
Loosen two hose clamps (10). Remove eight capscrews (11) and lockwashers (12). Remove pipe (13) and
gasket (14).
6.
Loosen two hose clamps (15). Remove hose (16) from radiator outlet. Remove hose clamps (10) and (15) from
hose.
7.
Remove two capscrews (17), lockwashers (18), and hose clamps (19).
8.
Loosen hose clamp (20) and remove overflow hose (21). Remove clamp from hose.
INSTALLATION
9.
Place hose clamp (20) on overflow hose (21). Place overflow hose on expansion tank and tighten clamp.
Position two hose clamps (19) and install lockwashers (18) and capscrews (17).
10.
Place hose clamps (15) and (10) on hose (16). Install hose on radiator outlet.
11.
Install gasket (14) and pipe (13) on hose (16) and on diesel engine outlet.
Install eight lockwashers (12) and capscrews (11). Tighten hose clamps (15) and (10).
12.
Place hose clamps (8) and (3) on hose (9). Install hose on radiator inlet.
13.
Install gasket (7) and pipe (6) on hose (9) and on diesel engine inlet.
Install lockwasher (5) and capscrews (4). Tighten hose clamps (8) and (3).
14.
Install thermostat connectors (2). Install pipe plug (1).
15.
Close drain cock and fill cooling system with a premixed solution of 50 percent water and 50 percent ethylene
glycol antifreeze.
16.
Start engine (para 2-11) and after cooling system warms up check for leaks.
4-96