TM 55-2210-223-34
TO 45A2-2-14-22
3-42. RADIATOR
This task covers:
a.
Removal
b.
Test
c.
Installation
INITIAL SETUP:
Tools
Material/Parts
Tool kit SC 4940-97-CL-E12
Drycleaning solvent (Item 30, Appendix B)
Antifreeze (Item 2, Appendix B)
Equipment Condition
Reference
Condition Description
Para 3-40
Shutters removed
Para 3-7
Hood removed
REMOVAL
NOTE
Check that radiator is drained.
1.
Remove 10 locknuts (1), flat washers (2), bolts (3).
2.
Remove eight clamps (4) and two 6-inch (152 mm) hoses (5).
3.
Disconnect vent tube (6) from radiator assembly (7).
WARNING
Components of this locomotive are heavy and may be awkward to handle. Use correct lifting procedures,
indicated lifting devices, and/or assistance from other personnel to avoid injury.
CAUTION
Use extreme caution in selection and installation of chains/ straps, etc. for Removal/ Installation of
radiator. Careless selection and installation of lifting devices may result in damage to radiator assembly.
4.
Use a suitable lifting device and lift radiator assembly (7) from locomotive. Slowly lower radiator assembly to
ground and set on a suitable support device.
3-167
