TM 55-2210-223-34
TO 45A2-2-14-22
3-52. EMERGENCY BRAKE VALVE (cont.)
REMOVAL (cont.)
2.
Remove two bolts (1), nuts(2).
3.
Remove cotter key (3), pin (4), and handle
(5).
4.
Rotate pipe elbow toward engineer's side.
5.
Remove emergency brake valve (6) from
pipe (7).
NOTE
Emergency brake valve must be repaired at
intermediate general support level maintenance
facility.
INSTALLATION
6.
Install emergency brake valve (6) on pipe (7).
7.
Rotate pipe elbow toward fireman's side.
8.
Install handle (5), pin (4), and cotter key (3).
9.
Install two bolts (1), and nuts (2).
TEST
10.
Refer to paragraph 2-9 and perform a
stationary vehicle airbrake test.
3-194