TM 55-2210-223-34
TO 45A2-2-14-22
3-58. BRAKE CYLINDER (cont.)
REMOVAL (cont.)
2.
Remove two bolts (3) and flat washers (4) and disconnect air line (5).
3.
Remove four bolts (6), lockwashers (7), nuts (8), and brake cylinder (9).
DISASSEMBLY
4.
Remove cotter pin (10), push rod holder pin (11), and push rod (12), from cylinder (13).
5.
Remove four nuts (14), bolts (15), and piston assembly (16).
6.
Disassemble piston assembly (16) by the following:
a.
Separate packing cup (17) and felt wiper (18) from piston assembly (16).
b.
Remove gasket (19).
NOTE
Piston assembly must be repaired at depot level maintenance facility.
3-204