TM 55-2210-223-34
TO 45A2-2-14-22
3-60. CENTRIFUGAL AIR FILTERS (cont.)
REMOVAL (cont.)
2.
Remove secondary centrifugal air filter by the
following:
a.
Remove four bolts (9) and lockwashers (10) and
disconnect air connections (11) and (12).
b.
Tag and disconnect electrical connection (13).
c.
Remove three bolts (14) and lockwashers (15).
d.
Remove secondary centrifugal air filter (16).
DISASSEMBLY
NOTE
For secondary centrifugal air filter remove six nuts (17)
and lockwashers (18).
3.
Remove eight nuts (17), lockwashers (18), sump
bowl (19), and gasket (20) from filter body (21).
4.
Remove wing nut (22) and filter element (23).
NOTE
If drain and solenoid valves show obvious defects, replace entire component.
5.
Remove two bolts (24), solenoid valve body (25), and O-ring (26).
6.
Remove four nuts (27), flat washers (28), and valve body (29).
7.
Remove three screws (30) and seal (31).
8.
Remove drain valve adapter (32).
9.
Remove exhaust tube assembly (33), two seals (34), and O-ring (35).
10.
Remove elbow (36).
3-211