TM 55-2210-223-34
TO 45A2-2-14-22
4-6. RADIATOR (cont)
CLEANING, INSPECTION, AND REPAIR (cont)
WARNING
Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Use only with effective chip-
guarding and personal-protective equipment (goggles, shield, gloves, etc.).
15.
Use compressed air and blow out each tube. Rinse with clean water.
16.
Visually examine top and bottom cores for cracks, breaks, or other damage.
17.
Refer to paragraph 3-42 and perform a leak test.
18.
Repair cracks, breaks, and leaks as required. Use duckbill pliers and straighten bent fins.
NOTE
Refer to appendix C for modification procedures.
ASSEMBLY
NOTE
Check to see if radiator has been modified. Refer to appendix C for modification and modification
procedures. Modify radiator prior to assembly.
19.
Install bottom core (22), gasket (21), and top core (20). Secure with 70 nuts (19), washers (18), and bolts (17).
20.
Install gasket (16) and bottom header (15). Secure with 70 nuts (14), washers (13), and bolts (12).
21.
Install four nuts (10) and washers (11).
22.
Install gasket (9) and top header (8). Secure with 70 nuts (7), washers (6), and bolts (5).
23.
Install four bolts (3) and lockwashers (4).
24.
Install four nuts (1) and washers (2).
4-4
