TM 55-2210-224-34
3-39.
FUEL TANK AND FUEL LEVEL GAGE (cont)
3.
Remove two capscrews (7), lockwashers (8), and clamps (9) from vent pipe
(10). Disconnect pipe union (11).
4.
Place a suitable support device under fuel tank (15).
5.
Remove 20 nuts (12), lockwashers (13), and capscrews (14).
WARNING
Components of this locomotive are heavy and may be awkward to handle. Use
correct lifting procedures, indicated lifting devices, and/or assistance from other
personnel to avoid injury.
6.
Use a suitable lifting device and remove fuel tank (15).
7.
Remove six capscrews (16), lockwashers (17), fuel level gage (18), and gasket
(19).
CLEANING, INSPECTION, AND REPAIR
8.
Steam clean exterior of fuel tank (15) and remove dirt and grease.
9.
Purge interior of fuel tank (15).
10. Check that pipes, connections, and vent valves are tight and do not leak.
11. Check that fuel level gage (18) is not cracked or broken.
12. Repair leaks by welding, sanding, and painting as required.
13. Replace damaged parts as required.
INSTALLATION
WARNING
Components of this locomotive are heavy and may be awkward to handle. Use
correct lifting procedures, indicated lifting devices, and/or assistance from other
personnel to avoid injury.
14. Position gasket (19) and fuel level gage (18) on tank (15) and install six lockwashers (17) and capscrews (16).
15. Use a suitable lifting device and position fuel tank (15). Install 20 capscrews (14), lockwashers (13), and nuts (12).
16. Connect union (11). Position vent pipe (10) and install two clamps (9), lockwashers (8), and capscrews (7).
17. Connect fuel return line (6) and fuel supply line (5).
18. Position two gaskets (4) and fuel filler pipe connections (3) on fuel tank (10) and install eight lockwashers (2) and
capscrews (1).
3-166
