TM 55-2210-224-34
3-45.
AUTOMATIC BRAKE VALVE (cont)
INSTALLATION
8.
Position strainer (15) and gasket (14) on pipe bracket (16).
9.
Position automatic brake valve (13) and install four bolts (11). Install regulator handle (12).
10. Remove nut (9), position clamp (10), and replace nut.
11. Install four bolts (8) and locknuts (7).
12. Position gasket (6) and panel (5) and install eight screws (4).
13. Position gasket (3) and panel (2) and install eight screws (1).
TEST
14. Refer to paragraph 2-9 and perform a stationary locomotive airbrake test.
3-181