TM 55-2210-224-34
3-52.
EMERGENCY BRAKE VALVE (cont)
REMOVAL (cont)
NOTE
Emergency brake valve must be repaired at intermediate general support level maintenance facility.
INSTALLATION
5.
Install nipple (11) in emergency brake valve (3) and install elbow (10), nipple (9), elbow (8), and pipe (7) so they
are opposite handle.
6.
Install gasket (5) on pipe flange (6).
7.
Install emergency brake valve (3) and exhaust pipe assembly (4).
8.
Install two bolts (2) and locknuts (1).
TEST
9.
Refer to paragraph 2-9 and perform a stationary locomotive airbrake test.
3-195