TM 55-2200-001-12Sec. 6-Fig. 35-A (New-10-1968)CONTAINERS, CONEX TYPE, FULL OR HALF-SIZE, CROSSWISE, EMPTY, DOUBLE DECKED-GONDOLACARSWITH WOOD OR STEEL FLOORS, SECURED WITH PNEUMATIC, DUNNAGE, RUBBER, RE-USABLE TYPEItem No. of Pcs.DescriptionABrake wheel clearance. See Fig. 2, Sec. 1.B2 each side of1 1/2 in. x 1 1/2 in. x 1/4 in. steel angle clip by 1 1/2 in. long. See detail "E." Locate within corru-a two containergation groove of the lower container as shown in Sketch "C" and secure with Items "C" andstack."D." On one side of stack locate within the third groove from one end and within the secondgroove on the other end.C1 ea. per5/8 in. diameter tie-down "J" bolt, 6 3/4 in. long. See detail "G." Insert bolt through ItemItem "B.""B," locate hook of "J" bolt over the skid of the upper container as shown in Sketch "C" andsecure with Item "D."D1 ea. per1/2 in. locknut. Used to secure Items "B" and "C" as shown in Sketch "C."Item "C."E2 ea. at adjacent1/2 in. x 1 1/2 in. x 6 3/4 in. steel connector plate. See detail "F." Locate as shown in Sketch "D"top corners ofand secure with Items "F" and "G."containers intop layer.F2 ea. per1/2 in. x 5 in. steel bolt. Insert bolt through Items "E" as shown in Sketch "D" and secureItem "E."with locknut Item "G."G2 ea. per1/2 in. locknut. Used to secure Items "E" and "F."Item "F."HAs required.Anti-chafing board, 2 in. x 4 in. by load height In length. Position between containers stacksinside Items "C" and secure to skids of top and bottom containers with Item "J." See Sketch "B."JAs required.One strand of No. 8 gage black annealed wire. Used to secure Items "H" to preventdislodgment.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business