Sec. 6-Fig. 68-A (New-10-1960)
BODIES-STAKE-BRIDGE TRANSPORTING TRAILER-FLAT CARS-(Concluded)
Item
No. of Pcs.
Description
Q
2
2 in. x 4 in. x length to suit. Locate as shown. Nail to Items "L," "M" and "N" with 20-D
nails.
R
2
2 in. x 4 in. x length to suit. Nail each to car floor with five 20-D nails, toe-nail to Item "Q" with
two 20-D nails.
S
2
2 in. x 4 In. x length to suit. Nail upper end to Item "Q" with two 20-D nails and lower end to
Item "R" with two 20-D nails.
T
2
2 in. x 4 in. x 6 in. Locate on top of Item "S" and nail to Item "Q" with two 20-D nails.
U
2
2 in. x 4 in. x 6 in. Locate on top of Items "R," against lower end of Item "S." Nail to Item
"R" with two 20-D nails.
V
2
4 in. x 4 in. x 24 in. Locate on car floor under Item "W" as shown. Toe-nail each side to floor
with four 50-D nails.
W
2
2 in. x 4 in. x length to suit. Locate as shown against tail boards of bottom bodies on top of
Items "U" and "V." Toe-nail to Items "V" with two 20-D nails at each location.
X
1 per crate.
3/4 in. x .035 in. high tension band. Locate around crate and body of upper trailer as shown.
Seal on top of crate with two crimp type seals.
Y
12
3/4 in. x .035 in. high tension bands. Locate around stake racks and bodies of bottom and
middle tier. Seal with two crimp type seals at each location.
Z
8
1 1/4 in. x .035 in. high tension bands. Locate around all bodies in stack. Secure with two crimp
type seals at each location.
AA
8
2 in. x .050 in. high tension bands. Pass over all bodies In each stack and through stake pockets
on each side of car. Seal not less than 18 in. above stake pockets and on top of top body with
two crimp type seals at each location.
BB
5
1 1/4 in. x .035 in. high tension bands. Pass one band around Items "L," and two bands around
Items "M" and also Items "N" as shown. Seal with two crimp type seals at each location.
See General Rules 4, 5, 7, 9, 11, 14 and 15 for further details.
E-90
