TM 55-2200-001-12
Change 3
Section No. 1--General Rules (Rev.-9-1984)
(9)
The following methods of marking for purpose of identification, have been assigned to manufacturers and
suppliers whose products have been tested by the AAR and found to meet the requirements of this Rule. Marking
applied to high tension bands manufactured to metric dimensions must be followed by the letter "M" of the same size as
the original marking.
Name
Method of Marking
Markings
Acme Steel Company of Canada, Ltd.
Ink Print
AAR 22
American Banding Corporation
Ink Print
AAR 24
Brainard Strapping Division, Sharon Steel Corporation
Steel Die Imprint
AAR 26
Delta Strapping Industries
Ink Print
AAR 27
A. J. Gerrard & Company
Steel Die Imprint
AAR 28
Gibraltar Steel Corporation
Steel Die Imprint
AAR 29
Gibraltar Steel Corporation
Ink Print
AAR 29
Interlake, Incorporated
Steel Die Imprint
AAR 30
Pacific Steel & Supply
Ink Print
AAR 32
Samuel Strapping Systems, Ltd.
Ink Print
AAR 83
Signode Corporation
Paint Emboss
AAR*
Signode Corporation
Paint Emboss
AAR 11
Signode Canada, Ltd.
Ink Print
AAR 35
Stanley Strapping Systems, Division of The Stanley Works
Ink Print
AAR 36
Stanley Strapping Systems, Division of The Stanley Works, Ltd.
Ink Print
AAR 37
Steel Distributors, Ltd.
Ink Print
AAR 45
U. S. Steel Corporation, Cuyahoga Works
Paint Emboss
AAR 39
United States Steel Supply Division
Steel Die Imprint
AAR 42
Kasie Steel Corporation
Paint Emboss
AAR 43
Unimart, Incorporated
Paint Emboss
AAR 44
Kohan Kogyo Company, Ltd.
Ink Print
AAR (K)
Concept Metals, Ltd.
Ink Print
AAR 46
Samuel Strapping Systems, Inc.
Ink Print
AAR 47
*Reg. Signode Trademark.
IMPORTANT - High tension bands should be applied to packages and/or loads with markings facing outward.
D-31
