TM 55-2210-223-12
TO 45A2-2-14-41
Table 2-1.
Operator/Crew Preventive Maintenance Checks and Services
NOTE
Within the designated interval, these checks are
to be performed in the order listed.
B -
Before
D -
During
A - After
INTERVAL
ITEM
PROCEDURES:
EQUIPMENT
ITEM
TO BE
CHECK FOR AND HAVE REPAIRED
IS NOT READY/
NO. B
D
A
INSPECTED
OR ADJUSTED AS NEEDED
AVAILABLE IF:
MAKE THE FOLLOWING WALK-AROUND
CHECKS:
1
Exterior of
a. Visually inspect the following
Any component
Locomotive
items for proper operations,
damaged that
cracks, breaks, broken welds, and
would impair
damage:
locomotive
operation.
Cab
Truck
Couplers
Coupling mechanism
b. Visually inspect foundation
Parts are loose
brake for loose and dragging parts.
or dragging.
·
c. Visually inspect wheels for
Wheel is
defects and worn or missing brake-
damaged. Brake-
shoes. Ensure brakeshoes are in
shoe is worn or
proper alinement and brake cylinder
missing.
piston travel is between 3 and 6
inches (76 and 152 mm).
d. Check side bearing clearance on
No clearance
both trucks.
is apparent.
e. Inspect under locomotive for
Evidence of
evidence of fluid leakage (fuel,
Class III leak.
oil, and coolant).
2
Sandtraps
Check that the sandtraps contain
Sanders are not
and Sanders sufficient sand. Add sand as
operating.
required. Check sanders for proper
operation.
3
Fuel Supply
Fuel Supply Check fuel supply in sight glass
There are fuel
on fuel tank. Fill tank with
leaks.
proper grade of fuel. Check for
fuel leaks.
2-22