TM 55-2210-223-34
TO 45A2-2-14-22
NOTE
Maintenance procedures for the following tables will be found in the applicable maintenance chapters.
Table 2-1. Quarterly and Annual Inspection Worksheet
Item
Quarterly
Annual
A - MECHANICAL
1. Inspect for wheel and truck details:
a. Bearings and wheels
X
X
b. Thrust plate and bolts
X
X
c. Wheel flanges
X
X
2. Inspect couplers and draft gears:
a. Coupler mechanism
X
X
b. Gage knuckle
X
c. Draft gear, carrier, etc.
X
3. Inspect foot boards, hand rails, steps, and safety appliances.
X
X
4. Inspect cab, hood, doors, windows, platform, etc.
X
X
5. Check operation or condition of:
a. Horn
X
X
b. Bell
X
X
c. Window wiper
X
X
d. Sander equipment
X
X
e. Cab heater
X
X
f. Shutters and shutter mechanism
X
X
g. Fan and fan drive
X
X
h. Handbrake
X
X
i. Hose and hose clamps
X
X
j. Belts and pulleys
X
X
k. Traction motor blowers and ducts
X
X
6. Drain water and sludge from fuel tanks.
X
X
B - ENGINE
7. Inspect the following for leaks:
a .Fuel system
X
X
b. Lube system
X
X
c. Cooling system
X
X
d. Cylinder heads, crankcase inspection plates, and covers
X
X
e. Exhaust and intake systems
X
X
8. Check cooling water level.
a. Test antifreeze
X
X
b. Comparator test water treatment
X
X
2-3
