TM 55-2210-223-34
TO 45A2-2-14-22
Table 2-1. Quarterly and Annual Inspection Worksheet (continued)
Item
Quarterly
Annual
20. Check brake details:
a. Rods, levers, and pins
X
X
b. Air hoses and couplings
X
X
c. Handbrake and chain
X
X
d. Brakeshoes and keys
X
X
e. Brake cylinders and piston travel
X
X
f. Centrifugal filters, strainer, etc. (clean items)
X
D - ELECTRICAL
21. Check lights and lighting system.
X
X
22. Check battery.
a. Check level of electrolyte.
X
X
b. Check specific gravity.
X
X
c. Wash off battery.
X
X
d. Clean and lubricate terminals.
X
X
23. Inspect rotating electrical equipment.
a. Visually check condition; clean and blow out:
(1) Commutators and armatures
X
X
(2) String bands
X
X
(3) Brushes and pigtails
X
X
(4) Brush holders
X
X
(5) Insulators, field coils, and insulation
X
X
b. Inspect and check:
(1) For proper drive gear lubrication
X
X
(2) Inspection covers (tight and clean)
X
X
(3) Motor nose suspension
X
(4) For proper traction motor support bearing lubrication
X
X
24.Inspect control circuits.
a. Check condition and operation and clean contact surfaces:
X
X
(1) Throttle contacts
X
X
(2) Electrical contactors
X
X
(3) Reverser
X
X
(4) Relays
X
X
(5) Resistors
X
b. Check connections for tightness.
X
c. Check fuses and knife switch.
X
X
E - GENERAL
25. Check fire extinguishers.
X
X
26. Clean engine and compartment.
X
X
27. Lubricate locomotive in accordance with LO 55-2210-223-12.
X
X
28. Test run locomotive.
X
X
29. Replace cab card.
X
X
2-5
