TM 55-2210-223-34
TO 45A2-2-14-22
3-7. HOOD AND HANDRAIL ASSEMBLIES (cont)
INSTALLATION
4.
Install radiator hood by the following:
a.
Install handrail (27) and secure with eight lockwashers (26) and bolts (25). Install lifting eyes on four
corners of hood.
b.
Position a person on each side of locomotive to guide installation procedures.
WARNING
Components of this hood assembly are heavy and may be awkward to handle.
Use correct lifting procedures, indicated lifting devices, and/or assistance from
other personnel to avoid injury.
c.
Use a suitable lifting device and slowly lift radiator hood (24) over locomotive. Slowly lower radiator hood
on locomotive and secure with 40 lockwashers (23) and bolts (22).
5.
Install engine hood by the following:
a.
Install handrail (21) and secure with eight lockwashers (20) and bolts (19).
b.
Install gasket (18).
c.
Install lifting eyes and cables at four corners of handrail (21).
WARNING
Components of this hood assembly are heavy and may be awkward to handle.
Use correct lifting procedures, indicated lifting devices, and/or assistance from
other personnel to avoid injury.
CAUTION
Care should be taken when lifting engine hood and door assembly to prevent
binding, uneven balance, or damage to engine components.
d.
Use a suitable lifting device and raise hood and door assembly over locomotive. Slowly lower hood to
deck.
e.
Install 26 flat washers (12), lockwashers (11), and nuts (10).
f.
Install 26 lockwashers (9) and bolts (8).
3-36
