TM 55-2210-224-12
4-28. SANDER HOSE ASSEMBLY
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Tool kit SC4940-97-CL-E16
REMOVAL
1.
Remove two bolts (1), lock-washers (2), and
clamps (3).
2.
Loosen two hose clamps (4) and remove hose
(5) and pipe (6). Remove hose clamps. If
necessary remove nipple (7).
INSTALLATION
3.
If removed, install nipple (7). Install two hose
clamps (4). Install hose (5) on nipple. Install
pipe (6) in hose. Tighten hose clamps.
4
Position pipe (6) and install two clamps (3),
lockwashers (2), and bolts (1). Do not tighten
bolts.
5
Adjust pipe (6) so that end of pipe is 3 inches
(76.2 mm) above rails. Tighten bolts (1).
4-73