TM 55-2210-224-12
4-29. SWITCHES, CIRCUIT BREAKERS, AND INDICATING LIGHTS (cont)
REMOVAL (cont)
7
Circuit breaker.
a.
Tag and disconnect electrical wires.
b.
Remove two screws (13) and lockwashers (14). Remove circuit breaker (15).
8
Indicating light.
a.
Remove light socket (16) and bulb (17).
b.
Remove push-on mounting nut (18), flat washer (19), and lens (20).
INSTALLATION
9
Indicating Light.
a.
Position lens (20) in control panel and install flat washer (19) and push-on mounting nut (18).
b.
Install bulb (17) and socket (16) in lens (20).
10
Circuit breaker.
a.
Position circuit breaker (15) in control panel and install two lockwashers (14) and screws (13).
b.
Connect electrical wires and remove tags.
11
Rotary switches.
a.
Position switch (12) in back of control panel and install plate (11), four lockwashers (10), and screws (9).
Install knob (8), lockwasher (7), and screw (6).
b.
Connect electrical wires and remove tags.
12.
Toggle switches
a.
Position switch (5) in control panel stand and install nut (4).
b.
Connect electrical wires and remove tags.
13.
Pushbutton switches.
a.
Position pushbutton switch (3) in back of control panel and install lockwasher (2) and nut (1).
b.
Connect electrical wires and remove tags.
4-76
