TM 55-2210-224-12
Table 3-1. Operator Troubleshooting (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE
7. ENGINE CRANKS BUT FAILS TO START.
Step 1. Check for empty fuel tank.
WARNING
Fuel is very flammable and can explode easily. To avoid serious injury or death, keep fuel away
from open fire and keep fire extinguisher within easy reach when working with fuel. Do not work
on fuel system when engine is hot. Fuel can be ignited by hot engine. Shut off engine and do not
smoke while refueling.
Fill fuel tank with diesel fuel (item 16 or 17, app E).
Step 2. Check for oil pressure below 15 psi (103 kPa).
Notify unit maintenance.
Step 3. Check for low battery fluid.
Notify unit maintenance.
8. ENGINE DOES NOT CRANK.
Step 1. Check for improper position of battery switch.
Set switch to CLOSED position.
Step 2. Check for improper position of control circuit breaker.
Set circuit breaker switch to ON position.
Step 3. Check for improper position of ENGINE STOP switch.
Set ENGINE STOP switch to RUN.
Step 4. Check for improper position of throttle.
Set throttle to IDLE position.
3-5
