TM 55-2210-224-34
3-37. MAIN GENERATOR (cont)
DISASSEMBLY (cont)
17. Remove six capscrews (34), lockwashers (35),
bearing cap (36), and gasket (37).
18. Remove six capscrews (38) and lockwashers (39).
19. Use a 3-inch pipe 60 inches in length and two slings
and support armature (45). Use two jack screws
and remove bearing housing (44) from magnet
frame (46).
20. Carefully set armature (45) on a suitable support
device.
21. Use a puller and remove sleeve (40) and bearing
nut (41).
22. Use a puller and remove bearing (42), oil slinger
(43), and bearing housing (44) from armature (45).
3-149