TM 55-2210-224-34
3-61. CENTRIFUGAL AIR FILTER (cont)
ASSEMBLY (cont)
17.
Install O-ring (39) and solenoid body (38) and secure with two lockwashers (37) and capscrews (36).
18.
Install new filter element (35), wing nut (34), and filter body (33
).
19.
Install new gasket (32) and sump bowl (31). Secure with eight lockwashers (30) and nuts (29).
INSTALLATION
20.
Install secondary centrifugal air filter by the following:
a.
Install secondary air filter (24) on bracket and secure with three lockwashers (23) and bolts (22).
b.
Install O-rings (28) and (27), connect flange fittings (26) and (25), and install four lockwashers (21) and bolts
(20).
c.
Feed flex conduit (19) and electrical leads (17) in electrical box and tighten conduit nut (18).
d.
Connect electrical leads (17) and remove tags. Position cover (16) and install two screws (15).
21.
Install main centrifugal air filter by the following:
a.
Install centrifugal air filter (10) on bracket and secure with two lockwashers (9) and capscrews (8).
b.
Install O-rings (14) and (13), connect flange fittings (12) and (11), and install four lockwashers (7) and
capscrews (6).
c.
Feed flex conduit (5) and electrical leads (3) in electrical box and tighten conduit nut (4).
d.
Connect electrical l
eads (3) and remove tags. Position cover (2) and install two screws (1).
3-219
