TM 55-2210-224-34
3-63. TRUCK ASSEMBLY (cont)
REMOVAL (cont)
10.
Raise
lifting
devices
simultaneously
until
locomotive is high enough (approximately 4 feet
[1.2 m]) to clear truck assembly. If unable to
raise high enough, remove 16 nuts (22),
lockwashers (23), and capscrews (24). Remove
two step assemblies (25).
11.
Roll truck assembly out from under locomotive.
Install safety stands under locomotive.
DISASSEMBLY
12.
Remove two capscrews (26), lockwashers (27),
and clamps (28).
13.
Remove four capscrews (29) and lockwashers
(30). Remove air line assembly (31) and two
gaskets (32).
14.
Remove eight nuts (33), lockwashers (34), and
capscrews (35). Remove two brake cylinders
(36). Refer to paragraph 3-57 for repair of
brake cylinder.
15.
Remove eight nuts (37),lockwashers (38), and
capscrews (39). Use a pry bar and remove four
stay plates (40).
3-223