TM 55-2210-224-34
3-63. TRUCK ASSEMBLY (cont)
DISASSEMBLY (cont)
WARNING
Components of the traction motor are
heavy and may be awkward to handle.
Use correct lifting procedures, indicated
lifting devices, and/or assistance from
other personnel to avoid injury.
7.
Disassemble traction motor-gear-unit wheelaxle-
assembly (62) by the following:
a.
Use a suitable lifting device and raise motor-
gear-unit wheel-axle-assembly (62). Remove
oil drain plug and drain oil from gear unit.
b.
Lower motor-gear-unit wheel-axle-assembly (62)
to the floor and position so that traction
motorear-unit assembly (126) is upside down
and wheel-axle assembly (125) is in the air.
c.
Remove 10 capscrews (112), lockwashers (113), seal rings (114), and gasket (115).
d.
Remove 17 capscrews (116) andlockwashers (117). Remove gear unit cover (118) and gasket (119).
e.
Remove four capscrews (120) and lockwashers (121). Remove two axle caps (122) and axle linings (123).
f.
Use a hoist and remove wheel-axle assembly (124) from traction motor-gear-unit assembly (125).
3-227
