TM 55-2210-224-34
3-63. TRUCK ASSEMBLY (cont)
INSTALLATION
WARNING
Components of the main generator are heavy and may be awkward to handle. Use correct lifting
procedures, indicated lifting devices, and/or assistance from other personnel to avoid injury.
53.
Roll truck assembly into position under locomotive. Use a suitable lifting device and lower locomotive into
proper position on truck.
54.
Position two step assemblies (25) and install 16 capscrews (24), lockwashers (23), and nuts (22).
55.
Install two pins (21) and four cotter p
ins (20).
56.
Position base (19) on side bearing safety hood (14) and install two lockwashers (18), capscrews (17), and roller
(16).
57.
Position shim pack (15) and side bearing safety hook (14) and install four capscrews (13), lockwashers (12), and
nuts (11).
58.
Position brake hose (10) and connect brake hose union (9).
59.
Position sander hose (7) on sander pipe (8) and tighten four clamps (6).
60.
Position two handbrake connecting chains (5) and install two pins (4) and cotter pins (3).
61.
Connect traction motor electrical leads (2) and remove tags. Slide insulating tubes (1) over connections.
3-232
