TM 55-2210-224-34
3-64. TRACTION MOTOR ASSEMBLY
This task covers:
a.
Removal
c.
Cleaning
e.
Repair
g.
Assembly
b.
Disassembly
d.
Inspection
f.
Test
h.
Installation
INITIAL SETUP
Tools
Materials/Parts
Tool kit SC4940-97-CL-E12
Abrasive cloth (Item 5, Appendix B)
Pinion depth gage
Drycleaning solvent (Item 34, Appendix B)
Feeler gage
Grease (Item 14, Appendix B)
Magnaflux 6635-01-131-0730
Clear acrylic lacquer (Item 19, Appendix B)
Dial indicator 5210-00-640-0953
Electrical insulating varnish
Portable propane torch 3439-00-542-0531
(Item 37, Appendix B)
Disassembly tool kit
Gray gloss enamel (Item 11, Appendix B)
Induction heater 2815-00-366-1432
Electrical tape (Item 36, Appendix B)
Large hydraulic press
Rubber insulating paint (Item 28,
Suitable lifting device
Appendix B)
Convection oven
Lubricating oil (Item 25, Appendix B)
Lifting sling
Iron blue pigment (Item 30, Appendix B)
Gear lubricating oil (Item 22, Appendix B)
Insulating paper (Item 29, Appendix B)
1-inch eye bolt (Item 3, Appendix B)
Dry ice (Item 10, Appendix B)
Safety wire (Item 38, Appendix B)
Equipment Condition
Reference
Condition Description
Para 3-35
Speed sensing alternator removed
Para 3-63
Traction-motor-gear unit removed
from wheel-axle unit
3-233
