SERVICE METER GAGE - TM-55-2210-224-34

TM-55-2210-224-34 Locomotive Diesel-Electric 56-1/2-Inch Gage 80-Ton 870 HP 0-4-4-0 Wheel Model B-B-160/160-4GE747-A1 NSN 2210-01-158-2980 Manual
Page Navigation
64

TM 55-2210-224-34 3-15. SERVICE METER GAGE This task covers: a. Test b. Removal c. Installation INITIAL SETUP Tools Test Equipment Tool kit SC4940-97-CL-E12 Variable dc voltage supply REMOVAL WARNING · Remove rings, bracelets, wristwatches, and neck chains before working around the locomotive. Jewelry can catch on equipment and cause injury, or may short across an electrical circuit and cause severe burns or electrical shock. · High voltage is used in the operation of equipment. Do not be misled by the term LOW VOLTAGE. Potentials as low as 50 volts may cause death. 1. Open electrical equipment cabinet door and set battery switch to OPEN. 2. Tag and disconnect wires (1) and (2). 3. Remove three nuts (3) and screws (4). 4. Remove meter (5) from front of meter panel. 3-50

Privacy Statement
Press Release
Contact