A-1 CHARGING CUTOFF PILOT VALVE
This task covers:
Tool kit SC 4940-97-CL-E12
Drycleaning solvent (Item 30, Appendix B)
Pneumatic grease (Item 16, Appendix B)
Emery cloth (Item 4, Appendix B)
Powder graphite (Item 10, Appendix B)
Lubricating oil (Item 19, Appendix B)
A-1 charging cutoff pilot valve removed
Valve assemblies are under a spring load. Use caution during disassembly procedures so that no parts fly
out, causing injury to personnel.
charging cutoff pilot valve provides break-in-two protection.
When removing or repairing brake valves or components, check air lines and pipes for corrosion, breaks,
splits, or loose connections. Repair of air lines and piping consists of replacing defective pipes, lines, and
connections. Refer to TM 55-2210-223-24P for identification of piping.
Remove two bolts (2) and remove top cover (3) and spring (4) from body (1).