TM 55-2200-001-12
Sec. 6-Fig. 40
AIRCRAFT FUSELAGE MOUNTED ON WOOD FRAME UNBOXED ON SKID BASE-FLAT CARS
Item No. of Pcs.
Description
A
Brake wheel clearance. See Fig. 2.
B
6 per unit.
Anti-Skid Plates, pattern 63. Locate between skids and floor as shown. Load must be stenciled
on both sides in one inch letters to read, "Anti-Skid Plates".
C 1 ea. end of load.
Each to consist of two pieces 2 in. x 4 in. length to equal to width of load. Secure lower piece to
floor with, six 30-D nails and top piece to one below In like manner.
D
8 ea. Item "C".
Each to consist of two pieces 2 in. x 4 in. x 24 in. Locate suitably spaced as shown against Item
"O". Secure lower piece to floor with six 30-D nails and top piece to one below in like manner.
E
6 per unit.
Each to consist of two pieces 2 in. x 4 in. x 24 in. Locate at each side of load as shown. Secure
lower piece to floor with four 30-D nails and top piece to one below in like manner.
F
2 ea. unit.
2 in. x .050 in. high tension bands. Locate as shown, attaching to opposite stake pockets of car.
Substitute, if desired, steel cable 3/8 in. x 6 x 7.
G
1 ea. unit.
2 in. x .050 in. high tension bands. Locate as shown, attaching to opposite stake pockets of car.
See General Rules 4, 5, 7, 9, 10, 11, 14 and 15 for further details.
E-50
